PENTA SATA HAT Expansion Board for ROCK PI 3 Rock pi 4 Rock 5A Raspberry Pi 5

 PENTA SATA HAT Expansion Board

Build your NAS based on Rock Pi 4 with up to 5 HDD/SSD and up to 100TB capacity

The Penta SATA HAT utilizes the M.2/PCIe interface on Rock Pi 4 to provide up to 5 SATA ports. This HAT works only with Rock Pi 4 mounted on the heat sink.

The concept of 4 internal SATA and one eSATAp design was chosen because it makes the setup more flexible for the use of external disks.

Features

• Up to 5x HDD/SSD, 2.5inch and 3.5inch storage is supported, max storage 100TB

• 4x SATA

• 1x eSATA with power

• utilizes two lanes of the PCIe 2.1 bus on Rock Pi 4

• DC power input with support for both 2.5inch drives and ROCK Pi 4

• External standard ATX power supply support for 3.5inch HDD

• HDD suspend mode support

• Software RAID 0/1/5 support

• Optional PWM control fan for HDD heat management

• Optional OLED display for IP / Store information

PLEASE NOTE: You need to order the heat-sink with the Rock Pi 4 otherwise the Penta HAT can not be mounted on top!